Boschmann 1800 Watt 4/3/2 Channel Power MOSFET Amplifier

PCH8882EX - Car audio amp with sleek design and serious power

Give your car audio system a boost each time you turn on your in car entertainment with the Boschmann PCH8882EX 1800-Watt 4/3/2 Channel Power MOSFET Amplifier giving serious power to your car speakers or subs.

The Boschmann PCH-8882EX 1800 Watt MOSFET power amplifier is seamless at running your high-powered in car sounds. Supportive features, such as self-activating on board protection system, external amplifier level controls, this 1800-Watt 4/3/2 Channel Power MOSFET Amplifier has been designed for big performance!

Boschmann car amps and vehicle speakers are New Zealander’s popular choice when it comes to a car audio amp system. Check out your local dealer today and get a new Boschmann car audio amplifier installed and performing in your car.

Call your nearest Boschmann car audio amp dealer today.

• Tri-Boost MOSFET technology with 30% larger field effect magnitude
• Externally variable amplified level controls to enhance musical equalisation & effect.
• Active Linkwitz-Riley design, 18dB/oct, 24dB/oct cont. variable crossovers
• Low noise-low distortion amplification via BOSCHMANN High Accuracy Common Mode Rejection (HACMR) technology.
• Discretely engineered advanced class amplifier topology with low loss rate & improved transient response
• Fully automated insertion process on high-value components that ensures the highest grade of amplified sound quality.
• Self-activating on-board schmidt-trigger design protection system for total amplifier safety
• Stereo/Mono connection with stabilized minimum load operation while producing a true bridged field effect.

:: Max Output: 1800 Watts
:: 4 Ohms Max Power Output @ 0.035% T.H.D.: 450W x 4ch
:: 4 Ohms Bridged Power Output @ 0.035% T.H.D.: 240W x 2ch
:: 2 Ohms RMS Output @ 0.07% T.H.D.: 180W x 4ch
:: 4 Ohms RMS Output @ 0.035% T.H.D.: 95W x 4ch
:: Low Pass Filter: (Variable) 50Hz-250Hz
:: HIGH Pass Filter: (Variable) 80Hz-1.2kHz
:: Frequency Response: +1/-1dB : @ 5Hz-50kHz
:: Signal to Noise Ratio: >100dB
:: Stereo Separation: >90dB (Stable into 2 Ohms operation)
:: Equalizer Controls - Bass Boost: 0/6/12dB
:: Input Sensitivity: 200mV ~ 6V
:: Input Impedance: 22K Ohms
:: Operation Voltage (Negative Ground): DC12V
:: Speaker Impendance @ Stereo Driven: 4 Ohms
:: Fuse Rating: 30A x 2
:: Dimensions (WxHxD): 270mm x 53mm x 380mm


:: 1x 1800W Car Amplifier
:: Installation accessories: operating manual, high level input connector wire and allen screws.
:: Supplied in appealing retail packaging with moulded protection.

:: 3 Year Boschmann NZ car stereo manufacturer's warranty.
:: 5 Year warranty if installed by a Boschmann NZ Ltd accredited car audio installation company*

Boschmann New Zealand Recommends
If you want the best performance from your Boschmann car audio amp, then Boschmann NZ strongly recommends the use of a quality Boschmann car stereo amp wiring kit. You’ll be amazed at the difference this will make to your car sound quality. It is definitely well worth the minimal cost involved to wire in a quality Boschmann amp / sub wiring kit with your new BM Audio Labs Amplifier.